Our factory uses high quality anthracite as raw material. It is made of carbonization by advanced process and refining process. The appearance is black cylindrical particles. It has reasonable pore structure, developed pore structure, large specific surface area, light weight, strong adsorption capacity, good wear-resistance, high adsorption ability, long use time and high mechanical strength. And so on. It has good effect on the purification of the toxic gas of the organic solvent, the toxic gas of the gas mask, the treatment of the exhaust gas, the purification treatment of industrial and living water, and the recovery of the solvent.
The study shows that using Coal Activated Carbon as an adsorption material, through the industrial use of coal Activated Carbon adsorption concentration + catalytic decomposition combination process, the whole activated carbon purification system has realized the closed cycle of purification and desorption process, the operation process does not produce two pollution, equipment investment and operation cost is relatively low. Under constant temperature and constant pressure, when the air flow reaches a certain speed, the adsorption capacity of activated carbon can reach 1050mg/g, and in the same environment, the higher the temperature, the better the adsorption effect of activated carbon, the greater the purification of the adsorption amount of organic solvent waste gas.